(ในสต็อกกรุงเทพมหานคร)12V 60 W แผงโซล่าเซลล์ โซล่าเซลล์ แผงพลังงานแสงอาทิตย์ Soler Panel แผงโซล่าเซลล์ โซล่าเซลล์ แผงพลังงานแสงอาทิตย์ โมโน (ประกอบด้วยตัวควบคุมพลังงานแสงอาทิตย์ 10A)ประมาณ 2-6 วันจัดส่ง
คุณสมบัติเด่น / รายละเอียดสินค้า:
1. Built
-in industrial microcontroller.
2. Complete 4
-PWM charging management.
3. One
-key setting, digital display, automatic memory function.
4. Dual mosfet reverse current protection, low heat generation.
5. Built
-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Controller
1. Before installing for the first time, please make sure that the battery has enough voltage so that the controller can recognize the battery type.
2. The battery cable should be as short as possible to minimize loss.
4. The charge regulator is only suitable for regulating solar modules. Never connect other charging sources to the charging regulator.
1. Connect the battery to the charge regulator
-positive and negative. If a 12V battery is detected, it will display 1; if a 24V battery is detected, it will display
2.
2. Connect the photovoltaic module to the regulator
-plus and minus.
3. Connect the user to the charging regulator
-positive and negative. Due to manual measurement, please allow an error of 0
-2mm. Please make sure you don’t mind before bidding. Due to the differences between different monitors, the picture may not reflect the actual color of the item. Thank you! 1X 60W solar panel 1X solar controller (10A) 1X alligator clip 1X car charger
Controller: | |
specification: | |
solar panel: | |
Power: | 60W |
USB output: | 5V |
DC output: | 20V |
Size: | 280 * 420 * 3mm |
Waterproof rate: | IP65 |
Conversion rate: | 19.6-20% |
Number of USB ports: | single |
Material: | monocrystalline silicon battery |
Model: | PWM |
Step-down charging: | 28.8V |
Floating charge: | 27.4V |
USB output: | 5V / 3A |
Self-consumption: | <10mA |
Discharge stop: | 21.4V |
Voltage: | DC 12V / 24V |
Maximum solar input: | <50V |
Current: | 10A / 20A / 30A / 40A /50A /60A |
Rated working current: | ≤20A |
Reconnect after discharge: | 25.2V |
Working temperature: | -35℃~60℃ |
Output voltage: | 12V / 24V automatically distinguish voltage |
With timer and light sensor, it can be used in solar lighting system (only for off-grid photovoltaic solar system): | |
-Used for 10A 12V photovoltaic system: | 120W solar panel, 12V lead-acid battery, maximum input voltage is 21V. |
-For 10A 24V photovoltaic system: | 240W solar panel, 24V lead-acid battery, 42V (for maximum input voltage). |
safety instructions: | |
3. The regulator is only suitable for lead-acid batteries: | OPEN, AGM, GEL (not suitable for Ni-MH, Li-ion or other batteries). |
System connection: | |
note: | |
The package includes: |