ðĶāļāļąāļāļĨāļĄāļāļđāđ āļāļąāļāļĨāļĄāļāļīāļāđāļāļĢāļāļĒāļāļāđâ āļāļąāļāļĨāļĄāđāļāļĢāļâ āļāļąāļāļĨāļĄāļāļīāļāļĢāļ āļāļīāļāļĢāļāļĒāļāļāđ āļĢāļāļāļđāđ āļĢāļāļāļĢāļĢāļāļļāļ āļāļĢāļ°āļāļēāļĒāļāļ§āļēāļĄāđāļĒāđāļ 318
āļāļļāļāļŠāļĄāļāļąāļāļīāđāļāđāļ / āļĢāļēāļĒāļĨāļ°āđāļāļĩāļĒāļāļŠāļīāļāļāđāļē:
āļĢāļāļĒāļāļāđāļāļąāđāļ§āđāļāđāļāđ12V 24VāļŠāļģāļŦāļĢāļąāļāļĢāļāđāļŦāļāđ6āļĨāđāļ10āļĨāđāļāļāđāļ°
FT POWER CORD ADJUSTMENT SCREWS CLAMP
1.Oscillating lever. Fan oscillates when lever is in "down"position. 4 Mainteriance Clean fan with a soapy cloth. Wipe with a wet rag and dry with a dustet. DO NOT use gasoline, benzine, thinners or other solvents. Lubrication is not necessary, as motor has been lubricated and sealed at factory
1.Oscillating lever. Fan oscillates when lever is in "down"position. 4 Mainteriance Clean fan with a soapy cloth. Wipe with a wet rag and dry with a dustet. DO NOT use gasoline, benzine, thinners or other solvents. Lubrication is not necessary, as motor has been lubricated and sealed at factory
| 2 Fan head angle adjustment: | To reset oscillating angle, turn off oscillating lever, move head of fan to new "start"position, turn on oscillating lever |
| 3. Tilt adjustment screws: | To change degree of up or down tilt, loosen screws, set position and tighten. |
