MEIK 35G ออกไซด์ไฟฟ้าเครื่องเชื่อมเหล็กเคล็ดลับการฟื้นฟู Solder ครีมครีมทำความสะอาด
คุณสมบัติเด่น / รายละเอียดสินค้า:
High quality
Step
1. When the temperature of the nozzle is 300
-360 ℃, the regenerative operation is performed. Step
2. Put the weld in the resurrection ointment and wait for a few seconds. Step
3. Clean welding nozzles with solder sponge or copper wire. Step
4. Tin is plated on the welding nozzle. Repeat 2
-3 steps when the regenerative effect is not obvious.
1. When the temperature of the nozzle is 300
-360 ℃, the regenerative operation is performed. Step
2. Put the weld in the resurrection ointment and wait for a few seconds. Step
3. Clean welding nozzles with solder sponge or copper wire. Step
4. Tin is plated on the welding nozzle. Repeat 2
-3 steps when the regenerative effect is not obvious.
| Attention: | When the abrasive residues on the solder nozzle for soldering, the abrasive attaches to the printed circuit board, which may cause erosion and damage to the circuit board. Please completely remove the abrasive on the solder nozzle before soldering. |
| Weight: | 35g |
| Size: | 34*25mm |
