สายวัดร่องกรู๊ฟท่อเหล็ก (Grooved Diameter Tape)
คุณสมบัติเด่น / รายละเอียดสินค้า:
Go/No
-Go pocket
-sized steel tapes for taking circumferential measurements, marked in 1/100ths of an inch increments Go/No
-Go side can be used to check cut or roll grooved pipe for conformance to Victaulic grooved pipe specifications Tapes notched on the lead end to allow proper overlap within the groove for more accurate measurement PT100A contains Go/No
-Go markings for use with ¾ – 24″ DN20 – DN600 pipe; tape marked with
0.01″
0.25 mm increments on the opposite side PT102A contains Go/No
-Go markings for use with Original Groove System sizes 8 – 12″ DN200 – DN300 and Advanced Groove System sizes 14 – 72″ DN350 – DN1800; tape marked in
0.02″
0.5 mm increments on the opposite side Go/No
-Go side of tapes may not be used to measure cast iron, ductile iron, or copper tube sizes
-Go pocket
-sized steel tapes for taking circumferential measurements, marked in 1/100ths of an inch increments Go/No
-Go side can be used to check cut or roll grooved pipe for conformance to Victaulic grooved pipe specifications Tapes notched on the lead end to allow proper overlap within the groove for more accurate measurement PT100A contains Go/No
-Go markings for use with ¾ – 24″ DN20 – DN600 pipe; tape marked with
0.01″
0.25 mm increments on the opposite side PT102A contains Go/No
-Go markings for use with Original Groove System sizes 8 – 12″ DN200 – DN300 and Advanced Groove System sizes 14 – 72″ DN350 – DN1800; tape marked in
0.02″
0.5 mm increments on the opposite side Go/No
-Go side of tapes may not be used to measure cast iron, ductile iron, or copper tube sizes
