THD+N: | analog, digital |
Free field frequency response ±6 dB : | 16 ... 800 Hz |
Free field frequency response ±3 dB : | 18 … 750 Hz |
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) : | <20 dB(A) SPL |
Sine wave output with a THD < 0.5 % at 1 m in half space : | 95 dB SPL (>70 Hz) |
Bass capability: | Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) |
Analog input(s) 2 x XLR: | analog electronically balanced |
Analog input impedance : | >13k Ohms |
Max. input level : | < +24 dBu |
Common mode rejection ratio (CMRR) : | > 56 dB @ 15 kHz |
Crosstalk (1 kHz), level matching : | < -90 dB; ±0.1 dB |
Volume control : | via Neumann.Control software |
Volume control range; resolution : | 0 … -∞ dB; 0.1 dB |
Analog dynamic range; THD+N : | 119 dB(A); <0.003% (-90 dB) |
Signal routing modes : | Right; External Bass Management; 2 x LFE |
Analog output(s) : | 2 x XLR; analog electronically balanced |
Input gain control (sensitivity) : | +2 ... -12 dB |
Output level control (output level in 1 m based on 0 dBu input level) : | 94; 100; 108; 114 dB SPL |
Digital input(s) : | BNC (75 Ω) |
Digital output(s) : | BNC (75 Ω) |
Digital converter: | resolution; design |
Digital converter: | sampling rate |
Dynamic range A-D-A : | >120 dB(A) |
Dynamic range D-A : | >123 dB(A) |
Digital sensitivity : | -18 dBFS = 100 dB SPL at 1 m |
Latency : | 1.5 ms (A-D-A linear phase); 1.2 ms (D-A linear phase) |
Delay: | User adjustable delay range |
Delay: | Resolution |
Delay: | Max. frames Audio-video synchronisation (lip sync) |
Delay: | Time-of-flight maximum distance |
Controller design : | Digital; active |
Crossover frequency : | 80 Hz |
Crossover slope : | 24 dB/oct; 4th order |
Phase : | 0; 45; 90; 135 und 0/180 deg |
Equalization: | via Neumann.Control software |
FIR phase correction : | For connected analog loudspeakers |
Protection circuitry : | Driver (thermo limiter); Electronics (temperature limiter); Amplifier (peak limiter, temperature limiter, temperature protection and overcurrent protection); Power supply (temperature limiter and overcurrent protection) |
Infrasonic filter: | frequency; slope |
Remote control : | Neumann.Control software via an RJ45 connector carrying standard IP data |
Display: | On; Normal Operation |
Display: | Identification |
Display: | Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute |
Display: | Bass Management on |
Output power woofer amplifier (THD+N with limiter deactivated: | 10%) |
Mains Power Supply: | input voltage; frequency |
Power consumption (230 V / 100 V): | Standby |
Power consumption (230 V / 100 V): | Idle |
Power consumption (230 V / 100 V): | Full output |
In-rush current (Peak) : | 30 A @230 VAC |
Standby : | Disabled; 90 mins (default); user defined in software |
Cabinet material : | Wood cabinet, aluminum electronics panel |
Cabinet surface finish; color (front / back) : | Painted; metallic anthracite (RAL 7021) / black (RAL 9005) |
Operating conditions : | +10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing |
Transport/storage conditions : | -25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing |
Woofer : | 265 mm (10") with protecting black metal grille |
Product dimensions (height x width x depth) : | 383 x 330 x 383 mm (15 1/8" x 13" x 15 1/8") |
External net volume : | 48.4 liters |
Product weight : | 19.5 kg (43 lbs) |