NSW WIRELESS CONTROLLER ADAPTER FOR NINTENDO SWITCH (AS)

#CLASSIC_GAMEOFFICIALS , #NSW_ACCESSORIES Quick Start Guide Buttons and LED Indicators
3.LED Indicators Press the button shortly to SYNC the controllers and the adapter. The indicator blinks quickly. To switch the modes, press and hold the button on the side of the adapter for 3
-5 seconds. The LED indicator blinks slowly in blue for the PS3 or PC Dinput system mode, the Nintendo Switch mode is red and the PC Xinput mode is green. Bluetooth Controllers Set Up
1. Firstly connect the Nintendo Switch system to a TV. Just turn on your PC if you use the adapter on your PC system.
2. Connect the adapter into any spare USB port on your Nintendo Switch or PC system.
3. To switch the modes, press and hold the button on the side of the adapter for 3
-5 seconds. The LED indicator blinks slowly in blue for the PS3 or PC Dinput system mode, the Nintendo Switch mode is red and the PC Xinput mode is green.
4. Turn on the Bluetooth controllers
5. To sync the Bluetooth controller and the adapter, press the Button on the side of the adapter, and then press the SYNC button on your Bluetooth controller. The LED indicator blinks quickly.
6. The Bluetooth has been paired if the LED indicator lights up
7. Your controller is now ready to use Wired Controllers Set UP
1. Firstly connect the Nintendo Switch system to a TV. Just turn on your PC if you use the adapter on your PC system.
2. Connect the adapter into any spare USB port on your Nintendo Switch or PC system.
3. Connect the wired controllers to the adapter.
4. Your controller is now ready to use Update the Software If you are having problems with the adapter, you can follow the below instructions to update the software.
2. Double click on the updater and leave the updater window open on your screen.
3. Connect the USB from your adapter into any spare USB port on your PC.
4. Please make sure your adapter is in the Nintendo Switch or PS3/Dinput mode (The LED indicator is in Red or Blue). If not, please switch the adapter to the Nintendo Switch or PS3/Dinput mode by pressing and holding the button located at the side of the adapter for 3
-5 minutes.
5. As soon as the adapter has been recognized (LED indicator turns off), select “Update”.
6. Do not disconnect the device until you are informed that the updated was completed successfully Important Note
1. Only one Bluetooth controller is supported for one adapter.
2. A wired USB controller and a wireless Bluetooth controller can be connected at the same time, but both of them have the same functions and can only play one game character.
3. To switch A
-B, B
-A, X
-Y, Y
-X, press and hold the button Start and A for 3 seconds. To switch A
-A, B
-B, X
-X, Y
-Y, press and hold the button Start and B for 3 seconds. This works only when you connect your Switch Pro, Switch Joy
-Con and Wii U Pro controllers to a PC Xinput system.
4. If you connect up to 4 Bluetooth controllers to the adapter, you can disconnect the first controller by pressing the button located on the side of the adapter, and disconnect the second one by pressing the button, and then the third and fourth controller using the same way.
5. To use the Nintendo Joy
-Con controllers, please connect the Nintendo Joy
-Con (R